MIC IP dynamic 7000 HD

MIC IP dynamic 7000 HD

SPECIFICATIONS

  • Exceptional strength and ruggedness for any outdoor, industrial, or commercial surveillance application
  • High Dynamic Range (HDR) to see details in bright and dark areas simultaneously
  • Optional, field-installable combo illuminator (IR/ White light) provides detection of objects up to 175 m (575 ft) away
  • Simple installation with new hinged DCA mounting accessory and new cable design
  • ONVIF conformant; provides interoperability with other conformant systems

TABLE DESCRIPTION:

Brand Model MIC IP dynamic 7000 HD
Imager 1/2.8-type Exmor CMOS sensor
Effective Picture Elements (Pixels) 1944 x 1224 (2.38 MP)
Lens 30x Zoom 4.3 mm to 129 mm F1.6 to F4.7
Field of View 2.3° to 65°
Focus Automatic with manual override
Iris Automatic with manual override
Digital Zoom 12x
Sensitivity / Minimum Illumination (typical) 30 IRE 50 IRE.
Day Mode (Color)
Fixed shutter 1/30, High Sensitivity mode On 0.052 lux 0.166 lux
Fixed shutter 1/30, High Sensitivity mode Off 0.26 lux 0.66 lux
SensUp On (max. ¼), High Sensitivity mode On 0.0082 lux 0.033 lux
Night Mode (Black and white)
Fixed shutter 1/30, High Sensitivity mode On 0.0103 lux 0.041 lux
Fixed shutter ¼, High Sensitivity mode On 0.00129 lux
SensUp On (max. ¼), High Sensitivity mode On 0.00065 lux 0.00205 lux
Mechanical
Drive Unit Brushless, integral pan/tilt motor drive
Pan Range 360° continuous rotation
Tilt Angle Without illuminators (camera upright): 290° Without illuminators (camera inverted): 250° With illuminators: 186.6°
Tilt Range Upright unit: -55° - +90° Canted unit: -90° - +90°
Variable Pan Speed 0.2°/second - 120°/second
Variable Tilt Speed 0.2°/second - 60°/second
Pre-position Speed 120°/second
Preset Accuracy 0.17° (typical)
Proportional Pan / Tilt to Zoom Yes
Zoom Movement Speed <5 seconds (optical Wide to optical TELE) ,<7.5 seconds (optical Wide to digital TELE)
Audible Noise <65dB
Electrical
Input Voltage 21-30 VAC, 50/60 Hz and/or Ethernet High PoE cable connection (56 VDC)
Power Consumption Without illuminator: 40 W maximum With illuminator: 70 W maximum
Communications / Software Control
Camera Setup/ Control Via Internet Explorer web browser version 7.0 or later, Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Video Client (BVC), or support for third party software
Software Update Network firmware upload
Serial protocols Bosch OSRD, Pelco P/D, and Forward Vision (Requires connection to a Bosch decoder and camera firmware 6.1 or later)
Network
Standards / Video compression H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming Four (4) streams with individually configurable frame rate and resolution: • Two (2) independently configurable H.264 recording streams • Two (2) non-recording streams (profiles)
Non-recording profiles Two (2) streams, I-frame only Options are: - HD Image Optimized; - HD Balanced; - HD Bit Rate Optimized; - SD Image Optimized; - SD Balanced; - SD Bit Rate Optimized; - DSL Optimized; - 3G Optimized
Resolutions (H x V)
• 1080p HD 1920 x 1080 (16:9)
432p SD 768 x 432
288p SD 512 x 288
• 144p SD 256 x 144
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Ethernet 10BASE-T/100BASE-TX, auto-sensing, half/ full duplex
Encryption TLS 1.0, SSL, DES, 3DES, AES
Ethernet connector RJ45
Connectivity ONVIF Profile S, Auto-MDIX
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms (typical)